If you’re like most people, you probably take hurricane preparedness seriously. But when it comes to protecting your home, don’t forget about your sliding glass doors. Hurricane shutters can provide an extra layer of protection for these vulnerable points of entry.
Installing hurricane shutters on your sliding glass doors is a relatively simple process and can give you some peace of mind when the next storm hits. Follow these steps and you’ll have them installed in no time.
Introduction
Installing hurricane shutters on your sliding glass doors is a two-part process. First, you need to install the shutter tracks. Second, you need to install the shutters themselves. This guide will walk you through both steps so that you can properly protect your home in the event of a hurricane.
Materials needed
To install hurricane shutters on your sliding glass doors, you will need:
-Tape measure
- drill
-1/4 inch impact driver - 3/16 inch drill bit
-3/8 inchSocket wrench and socket
-Phillips screwdriver
-Cordless drill
-Pry bar
-Counter sink drill bit
-Hammer
-1/2 inch drill bit (optional)
-Circular saw (optional)
Tools needed
In order to install hurricane shutters on your sliding glass doors, you will need the following tools:
-Measuring tape
-Level - drill
-1/8″ drill bit
-Phillips head screwdriver
-Circular saw
-Paint or wood Stain (optional)
The first step is to measure the width and height of your sliding glass doors. Next, you will need to decide what type of hurricane shutter you would like to install. There are many different types and styles of shutters available, so be sure to do your research before making a purchase. Once you have decided on the type of shutter you want, it is time to start installation.
If you are installing accordion shutters, begin by attaching the top brackets to the lintel above the door using screws and the drill. Once the top brackets are in place, repeat this process for the bottom brackets. Next, fit the accordion panels into the brackets and secure them by closing and locking the panels.
If you are installing Bahama shutters, start by attaching the hinges to the door frame using screws and the drill. Once all of the hinges are in place, fit the shutter panel into the hinges and secure it by closing and locking the panel.
If you are installing roll-down shutters, begin by attaching the mounting bracket to the door frame using screws and the drill. Once all of mountings brackets are in place, insert
Step-by-step guide
- Measure the width of your sliding glass door to determine what size shutters you need to purchase.
- Purchase the shutters and installation hardware from a home improvement store or online retailer.
- Remove any screens or storm panels from your sliding glass door.
- Install the brackets on the inside of your sliding glass door frame, using screws that are appropriate for the type of material your door is made of (wood, metal, etc.).
- Place the shutters in the brackets and make sure they are level.
- Close the shutters and lock them in place using the provided hardware.
- Test the shutters to make sure they are secure and functioning properly.
Tips and tricks
Here are some tips and tricks for installing hurricane shutters on sliding glass doors:
-Start by measuring the width and height of your door. You’ll need to know the dimensions of the door in order to purchase the right size shutter.
-Next, determine what type of shutter you want to install. There are several different types of hurricane shutters, including accordion shutters, roll-down shutters, and Bahama shutters.
-Once you’ve selected the type of shutter you want to install, it’s time to purchase the materials. Be sure to buy high-quality materials that can withstand strong winds and heavy rain.
-Now it’s time to install the shutters. If you’re not comfortable doing this yourself, hire a professional contractor to do it for you.
-After the shutters are installed, be sure to test them out to make sure they’re working properly. Strong winds can cause damage to your home, so it’s important to be prepared.
Common mistakes
Installing hurricane shutters on your sliding glass doors is a vital part of protecting your home in the event of a severe storm. However, there are a few common mistakes that people make when installing these shutters. By avoiding these mistakes, you can be sure that your shutters will provide the maximum amount of protection for your home.
One common mistake is not properly attaching the shutters to the door frame. The shutters should be securely bolted or screwed into the door frame so that they cannot be easily removed. Another mistake is not properly sealing the edges of the shutters. If there are gaps around the edges of the shutters, wind and rain can enter your home through those gaps. Finally, some people do not use hurricane straps to secure their sliding glass doors. Hurricane straps help to safeen the door to the frame and prevent it from being blown in by high winds.
FAQ
How do I know what size shutters I need?
For all doors and windows, you’ll need to measure the width of the opening in inches, then round up to the nearest even number. For example, if your opening is 36 inches wide, you’ll need 36-inch-wide shutters.
Do I need to install tracks for the shutters?
No, our hurricane shutters install without the use of tracks.
Can I install the shutters myself?
Our hurricane shutters are easy for do-it-yourselfers to install. However, if you have any questions or concerns about installation, please don’t hesitate to contact us and we’ll be happy to assist you.
How long will it take to receive my order?
We typically ship orders within 10 business days. Shipping times may vary depending on your location.
Conclusion
In conclusion, installing hurricane shutters on sliding glass doors is a important safety measure to take if you live in an area that is prone to hurricanes or other severe weather conditions. By taking the time to properly install these shutters, you can protect your home and keep your family safe during a storm.
